.

.

כלי רצועת פלדה של Yaetek A333 כלי רצועה ידני לרוחב 1/2 אינץ '5/8 אינץ' 3/4 אינץ

כלי רצועת פלדה של Yaetek A333 כלי רצועה ידני לרוחב 1/2 אינץ '5/8 אינץ' 3/4 אינץ

ILS 169.99
סחורה
זמין.

מיועד לרוחב הלהקה 1/2 אינץ '5/8 אינץ' 3/4 אינץ 'רצועות פלדה; רצועות פלדה רצועות פלדה A333 ידניות זו ברוחב מקסימום (19 מ"מ) 3/4 "; חוזק : בערך 80%; מיועד לרוחב פס רוחב 1/2 אינץ '5/8 אינץ' 3/4 אינץ 'פלדה; זהו כלי רצועה משולב קליל ושימוש ללא חותם לרצועת רצועות פלדה על חבילות שטח שטוחות חוזק חותם של רצועת פלדה ממוצעת : בערך 80%; Yaetek A333 כלי רצועה ידני לרוחב רוחב 1/2 ", 5/8", 3/4 '' מפרט רצועות פלדה : 1. רוחב רצועה : 12.7-19 מ"מ (1/2 "-3/4") 2. חוזק חותם ממוצע : בערך . הרצועה 4- הרם את הנדנדה ביד ימין. היד השמאלית מכניסה את שתי הרצועות השוכנות בעיצומה על אחרת לכלי עד שהם פוגעים ברצועה. הרצועה מוחזקת על ידי חבילת מדריך הרצועה כוללת : 1 SET X A333 כלי רצועות פלדה ידנית הודעה חמה הודעה חמה : כאשר השתמש במכונה, אנא ללבוש כפפות וכוסות הגנה.

] על המוצר עד

1. Strapping Width:
12.7-19mm(1/2-3/4)
2. Strapping Thickness:
0.38-0.7mm
3. Average seal strength:
About.80%
4.Weights:
3.9 kg / 8.6 lbs.
5.Default For Banding 3/4 steel Straps:
Operatio Tips:
1- Please Feed the strap around the package:
2- Please hold the strap end tightly with the left hand and pull firmly towards the operator with the right hand.:
3- load the strap:
4- Raise the rocker with the right hand. the left hand inserts the 2 straps lying presicely upon another into the tool until they hit strap stops.:
5- Please note the lower strap end should slightly protrude the base plate end.Ensure that the strapping is held by the strap guide:
Package Includes:
1set X A333 Manual Steel Strapping Tool
Warm Notice:
When use the machine,please wear protection gloves and glasses.

קונים גם בוחרים